Duerkopp Adler 743-121 User Manual

Contents PagePart 4: Instructions for programming DA-Microcontrol cl. 743-121 Program version: 743LC-A031. General . . . . . . . . . .

3.10 Selecting the Output ElementsCaution Danger of Injury !Do not put your hands into the machine while it is operating.Choose your position so that

3.12 Positioning the Machine Head in the 1st Needle PositionThe machine head is poisitioned in the 1st position (needle down) withthis program.–Progr

4. Operation Displays and Error MessagesDisplay Explanation CommentsP?743A01---REF---> REF--->---x---POS-ERR--( )--SW?E2STOPb417b16b4Illegal

12345613

5. Step Motor OutputCaution Electric Current !Turn the main switch off !The switches may not be adjusted carrying currrent.The switches must be in th

2

1. GeneralThe DÜRKOPP ADLER 743-121 controls, with the integrated MULTI-TEST testing and monitoring system, assumes control and supervisionof the sew

2. Description of the Controls2.1 Operating Elements on the Front PanelButton DescriptionSelecting the sewing and testing programsStopping the curre

2.2 Operating Elements in the ControlsThe switch b417 in the control must be set suitably for the individualwork methods.The dials b401 und b402 are

3. Setting the Sewing and Testing ProgramsThe sewing and testing programs are selected via the" Programm " preselector switch.Switch Functi

3.3 Set blower timesThe blower period for blowing out the piece to be sewn are adjustable. –Set " Programm " switch to " 40 ".–Pr

3.6 Current Passage Check1. This program checks to see if the 24 V power unit supplies currentwhen the output drivers are switched off.2. The program

3.8 Test of the Input ElementsThe program checks the status of the input elements.–Set " Programm " switch to " 62 ".–Press "