Duerkopp Adler 579 Operations Instructions download pdf (Page 73)

33.20 Step Motor Test

The step motors for the three motion axes of the 579 can be tested in

this menu.

When you are in the service menu, sequentially select the following

menu items with the arrow keys and the “OK” key:

- Test Functions

- Multitest

- Step Motor Test

The “ Step Motor Test ” menu appears.

–

Select the desired axis with the arrow keys.

–

Press the “OK” key.

–

If the step motor for the lateral or rotational axis is selected, move

the motor with the arrow-left and -right keys.

–

If the step motor for the longitudinal axis is selected, move the

motor with the arrow-up and -down keys.

–

After the pressing of the key the step motor moves 5 steps.

–

If one presses the"ESC“ key, the test of the current step motor is

ended.

–

Select another step motor or exit the step motor test by pressing on

the “ESC” key.

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 84 85

No comments

Duerkopp Adler 579 Operations Instructions Page 73