Duerkopp Adler 579 Operations Instructions download pdf (Page 70)

33.17 Output Test

ATTENTION !

The turning-on of output elements can lead to collisions with other

machine elements and to damage to the automatic sewing machine.

Before any output element is turned on make sure that this cannot

collide with other components of the automatic sewing machine.

One can switch individual or several outputs in this menu.

–

When you are in the service menu, sequentially select the following

menu items with the arrow keys and the “OK” key:

- Test Functions

- Multitest

- Output Test

The “ Output Test ” menu appears.

–

Select the desired output with the up and down arrow keys. The

current status of the output is shown behind the output number:

- = Output not activated

+ = Output activated

–

Press the “OK” key.

–

The output is switched over.

With output Y16 (knife), a warning appears.

Press the OK key. The knife is switched.

Output Designation

Y1 Cloth clamps

Y2 Spread the material

Y3 Needle thread tension

Y4 Needle thread gripper

Y5 Draw forward the needle thread

Y6 Needle thread trimmer

Y7 Open the looper thread tension and draw thread forward

Y8 Looper thread trimmer depending on subclass

Y9 Needle thread catcher

Y10 Looper thread trimmer with subclass

579-121000 and 579-141000

Y11 Needle thread catcher gripper

Y12 Needle thread catcher swings to the needle

Y16 Cutting buttonholes

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 84 85

No comments

Duerkopp Adler 579 Operations Instructions Page 70