9. Sewing
The description of the sewing process is based on the following assumption:
–
The machine in question is a special sewing machine of sub-class
768-274-FLP-HP
.
–
The following functions are set on the operating panel:
stitch counting: OFF
basic needle position: DOWN (position 1)
auto sewing-foot lift on stop in mid-seam: OFF
starting bar-tack: OFF
ending bar-tack: OFF
thread cutter THREAD CUTTER +
RETURN
–
Main switch on.
Operating and function sequence for sewing:
Sewing process Operation / Explanation
Before starting to sew
Initial position
Position the material
at the start of the seam
- Pedal in rest position.
Sewing machine at a standstill.
Needle up. Sewing feet down.
- Push pedal half-way back.
The sewing feet rise.
- Press material against the needles.
Sewing
- Push pedal forwards and hold it there.
The machine sews at the speed determined
by the pedal.
In mid-seam
Interrupting the sewing process
Continuing the sewing process
(after releasing the pedal)
- Release pedal (rest position).
The machine halts in the 1st position
(needle down).
The sewing feet are down.
- Push the pedal forwards.
The machine sews at the speed determined
by the pedal.
24
Comments to this Manuals